|
|
| |
 |
| |
How to set up Port Forwarding using Netgear Router
(WGR614v6, WGT624v3, WGT624v3 RV) |
| |
1. Open a web browser. Type http://192.168.1.1 in the address bar of the web
browser as shown below.
|
2. Enter your user name and password. For this model, default user name is
“admin” and the default password is “password.”
|
3. Click on [Port Forwarding/Port Triggering], and then click on [Add Custom
Services] to set up Port Forwarding.
|
4. Configuring Port Forwarding.
1) In [Service Name] field, enter “iptv1”
2) Select “TCP” for [Service Type]
3) Enter 9401 in both [Start Port] and [Ending Port] fields.
4) In [Server IP Address] field, enter the IP address of the PC. (How to check
the IP Address of your computer)
5) Click on [Apply] to save the setting.
6) In [Service Name] field, enter “iptv2”
7) Select “TCP” for [Service Type]
8) Enter 9402 in both [Start Port] and [Ending Port] fields.
9) In [Server IP Address] field, enter the IP address of the PC. (How to check
the IP Address of your computer)
10) Click on [Apply] to save the setting.
|
5. Setting up a static IP address (within the network) on your server PC
(where MY-IPTV Anywhere Server is installed). [LINK]
|
| |
 |
|
|
